[Latebraking]

Concerning the Graves rearsets, in their most relaxed position, how does the peg placement compare to stock?

 

[AV80R]

The Graves at their lowest position is still higher than stock.

No more grinding boots, pegs, or pedals even at 55 degrees of lean.

 

[Latebraking]

The Graves at their lowest position is still higher than stock.

No more grinding boots, pegs, or pedals even at 55 degrees of lean.

How much higher? Farther to the rear?

 

[AV80R]

I did not take before/after measurements but I have two 4RR's (one stock, one Graves) so can get some measurements for you in the future.

 

[Latebraking]

I did not take before/after measurements but I have two 4RR's (one stock, one Graves) so can get some measurements for you in the future.

Okay, that would be great, thanks.

 

[Latebraking]

Do the Galespeed front master cylinders have a provision for the brake light switch?

 

[AV80R]

@Gravesport provided a switch that enabled me to retain the brake light function.

 

[Latebraking]

@Gravesport provided a switch that enabled me to retain the brake light function.

Cool, thank you.

 

[AV80R]

My 40th got a special muffler. The blue laser etched logo and all titanium construction just fits so perfect, thanks to @Gravesport & @Chuck Graves

I love it!

 

[ithaca00]

That fits the bike perfectly!

 

[AV80R]

First oil change on the 40th. Oil was glittery just like the KRT.

I wanted to change it sooner but didn't have time!

10.3 hours and 557 miles

 

[Gravesport]

Very nice Arash !!!! Thanks for letting our custom side of the shop drop it!

 

[AV80R]

I've been loving it, thanks Shane!

 

[AV80R]

Bought some Rizoma spools as a temporary measure for my 40th until the special pin hooks are available.

Need to do some chain maintenance!

 

[Swamp Daddy]

Spools instead of hooks?

 

[Florida lime]

Bought some Rizoma spools as a temporary measure for my 40th until the special pin hooks are available.

Need to do some chain maintenance!

View attachment 5866

View attachment 5865
View attachment 5864

Rizoma spools, not Graves !?
I'm telling Chuck ! 🤣

 

[Florida lime]

Special pin hooks ?
Silver to match the frame ?
NOW you tell me.

 

[AV80R]

I did say "special" pin hooks 😉😘

 

[AV80R]

Another track day coming up this Sunday for the Graves KRT.

Even though it only did 130 miles at the last one it's prudent to disassemble, clean, and inspect before the next outing.

The race fairings from @Gravesport make this so nice. It took me only 4 minutes to go from ready to ride to totally undressed.

Here are all the fasteners needing removal for the fairings, fenders, and tank.

Fairings - 6
Front fender - 4
Tank - 4
Rear fender - 3

 

[Latebraking]

That's one of the key considerations of a race bodywork setup - ease of installation or removal. You never know when you might need last minute, quick access to a place behind a panel before heading out for the warmup lap, or during an endurance race.