Joined
·
33 Posts
Zero Gravity Windscreens
1 - 20 of 31 Posts
Joined
·
42 Posts
Arriving tomorrow!
![Font Parallel Circle Screenshot Event]()
Joined
·
33 Posts
@ME-Motorsports What model did you order?
I'll be getting the Marci in smoke when that time comes.
Really sharp looking design and a tad bit higher than stock but not so tall to take away from the already seductive lines of the bike. 🥰
@SCracing you know I want that 10% and hopefully a drop ship for everything when the time is right. 👍
Really sharp looking design and a tad bit higher than stock but not so tall to take away from the already seductive lines of the bike. 🥰
@SCracing you know I want that 10% and hopefully a drop ship for everything when the time is right. 👍
Joined
·
42 Posts
Marc1 in light smoke
Same platform
Joined
·
42 Posts
Not sure what kind of photos you want to see of it (Marc1 in light smoke) but here it is...
![Amber Font Transparency Advertising Grass]()
![Font Material property Wood Packing materials Pattern]()
![Sleeve Font Automotive tire Plastic wrap Personal protective equipment]()
![Hood Automotive design Natural material Automotive exterior Fin]()
Compared to the Light Smoke Marc1 on the N400
![Tire Wheel Watch Motor vehicle Vehicle]()
Compared to the Light Smoke Marc1 on the N400
Joined
·
108 Posts
Light smoke ? I would have guessed dark smoke by the picture.
2018 Ninja 400, 2015 ZX6R, 2019 Z900, 2012 KX65 (kart track), 2018 MT07
Joined
·
31 Posts
Same thought I had, I’ll stick to clear.
Joined
·
42 Posts
It lightens up when installed and isn't under their shrink wrap.
![Tire Wheel Vehicle Motorcycle Automotive lighting]()
I also purchased screens for my H2 SX and H2 - both in light smoke. Didn't install on the H2 as I've got some other parts to install first.
But the H2 SX you can see clear through it from the front to the tank
![Tire Automotive tire Automotive lighting Hood Motor vehicle]()
I also purchased screens for my H2 SX and H2 - both in light smoke. Didn't install on the H2 as I've got some other parts to install first.
But the H2 SX you can see clear through it from the front to the tank
Attachments
I really like the look of that Marci wind screen. It's a very clean look and certainly what I'll be getting.
Looks good @ME-Motorsports. 🥰
Judging by the pictures the Marci is a touch taller and considered more aero than stock or Corsa.
Im 6 foot and really never had an issue with wind on the track giving me problems.
I also train daily on the truck that's bike specific so I can do all sessions in a day without too much fatigue between sessions. It also keeps me young to be able to do the things I've always done in life.
Now my decision is light smoke or dark smoke. 🤔
My Ninja and VTR both have dark smoke. Hmmm 😉
Joined
·
108 Posts
WHY did you prefer the Puig screen ?
Inquiring minds want to know. 😄
Joined
·
42 Posts
I personally usually go for MRA screens but I have not seen anything from them yet. But now that I know the ZX-25R screen is the same I'll have another look.
:::EDIT:::
MRA does make one for the ZX-25R. Just ordered it. Likely will have this ZG Marc1 for sale once it arrives.
ZX-25 R - Racingscheibe "R" 2020-
Vorgestellt auf der Tokyo Motor Show wird die kleine Ninja wirkt sehr erwachsen. Ihr Hauptaugenmerk liegt wahrscheinlich eher auf den asiatischen…
www.mrashop.de
Puig is a higher quality product, thicker and more durable, but they offer limited products that are more racing focused. The ZG offer a bigger selection but they are thin plastic that are known to break or crack. My ZG's were fine and I can't complain about the quality but holding a Puig in 1 hand and a ZG in the other it becomes obvious which is the higher quality build
1 - 20 of 31 Posts
